Not sure how big to make your design? Use these examples as a starting point when building a DTF gang sheet. Dimensions refer to the printed artwork at its final size, not the shirt or the whole sheet. The garments pictured are visual examples; measure your actual blank before ordering.

Quick transfer size ideas
| Garment and placement | Suggested artwork size | Good to know |
|---|---|---|
| Adult T-shirt, full front | About 10–11 in. wide | Center on the shirt; artwork height follows its proportions. |
| Adult T-shirt, left chest logo | About 3–3.5 in. wide | Keep it over the wearer’s left chest, away from the armpit. |
| Youth T-shirt, medium/large full front | About 9–10.5 in. wide | Check the shirt's printable width before choosing the larger end. |
| Youth T-shirt, small full front | About 7–8.5 in. wide | Scale down from adult artwork to leave breathing room at the sides. |
| Toddler T-shirt, full front | About 5–5.5 in. wide | Check the small chest area and seams. |
| Baseball cap, front panel | About 3.5–4 in. wide × up to 2.25 in. tall | Measure the flat, usable panel; keep artwork clear of seams and brim. |
These are starting points, not fixed limits. Shirt cut, cap crown, pockets, seams, and the shape of your artwork all affect the best fit. A tall design and a wide design at the same stated width will look different. Keep the artwork proportional instead of stretching it.
How to choose your size
- Measure your blank. Lay the shirt or cap flat and measure the space where the design will go.
- Cut a paper sample. Print or cut a rectangle at the proposed size and hold it against the garment to see the real scale.
- Set the final artwork dimensions. In your gang sheet, size each design to the inches you want printed. Leave space between designs for cutting.
- Upload clean artwork. Use a transparent-background PNG at 300 DPI at the intended print size for best results.
Ready to arrange your designs? Build a gang sheet. For pressing steps, see our DTF application instructions.
